Wednesday, May 26, 2010

My Latest in MetalSmithing...

It has been a while since I posted any of my projects from the Beginning Metals classes that I took at the Raleigh Pullen Arts Center.

My latest is this carnelian cab set in fine sterling on a sterling backplate. The 20g sterling sheet was first annealed, run through the rolling mill until it was approximately 24g, then it was textured with a piece of old lace on both sides, cut and filed to shape. I cut the leaves from a piece of sterling milled to 24g, stamped the details and soldered it to the backplate and bezel. In my hurry to set the stone I totally forgot to solder a bail - can't do that after setting a stone - duh! Not to worry, I drilled holes and wire-wrapped carnelian beads to sterling chain, and formed the front-closing clasp. Pendant tumbled for shine.

BTW, I made 2 of these pendants, initially thinking of earrings but... Now I have 1 to sell (soon to be added to my Etsy shop) and 1 to keep for myself!






3 comments: